Implementation of a controller for an inverted pendulum type robot
DOI:
https://doi.org/10.47187/perspectivas.6.2.222Keywords:
Inverted pendulum, control software, LQRAbstract
In indoor mobile robotics, wheeled robots stand out due to their simpler mechanics and lower maintenance requirements compared to legged articulated robots. This work describes the phases for implementing control software for an inverted pendulum robot using the Linear Quadratic Regulator (LQR) algorithm. The software architecture can be decomposed into large abstraction blocks, combining embedded software libraries and software components developed specifically for the project. Most inverted pendulum projects use a PID control, primarily due to the simplicity of its implementation. This method is functional but lacks scalability, consumes time, and, although some implementations exhibit excellent disturbance rejection, there is no guarantee of stability if any robot parameter changes. The developed prototype could serve as an experimental foundation for future research in mobile robotics or automatic control.
Métricas
References
P. Frankovský, L. Dominik, A. Gmiterko, and I. Virgala,
“Modelling of two-wheeled self-balancing robot driven by
gearmotors” International Journal of Applied Mechanics and
Engineering, vol.22, 2017.
E. Olguín-Díaz, “3D Motion of Rigid Bodies:
A Foundation for Robot Dynamics Analysis”, ser.
Studies in Systems, Decision and Control. Springer
International Publishing, 2018. [Online]. Available:
https://books.google.com.mx/books?id=9vt9DwAAQBAJ.
G. Rigatos, K. Busawon, J. Pomares, and M. Abbaszadeh,
“Nonlinear optimal control for the wheeled inverted pendu-
lum system” Robotica, vol. 38, no. 1, pp. 29–47, 2020.
S. Kim and S. Kwon, “Dynamic modeling of a two-wheeled
inverted pendulum balancing mobile robot” International
Journal of Control, Automation and Systems, vol. 13, no. 4,
pp. 926–933, 2015.
C.-F. Hsu and W.-F. Kao, “Double-loop fuzzy motion control
with cog supervisor for two-wheeled self-balancing assistant
robots” International Journal of Dynamics and Control, pp.
–16,2020.
H. Ahmadi Jeyed and A. Ghaffari, “A nonlinear optimal
control based on the sdre technique for the two-wheeled self-
balancing robot” Australian Journal of Mechanical Enginee-
ring, pp.1–9, 2020.
R. D. Huerta Gil, “Control de un p ́endulo invertido sobre
dos ruedas de tres grados de libertad” Thesis, Universidad
Nacional Autónoma de México, 2014.
M. Fauziyah, Z. Amalia, I. Siradjuddin, D. Dewatama, R. P.
Wicaksono, and E. Yudaningtyas, “Linear quadratic regulator
and pole placement for stabilizing a cart inverted pendulum
system” Bulletin of Electrical Engineering and Informatics,
vol. 9, no. 3, pp. 914–923, 2020.
M. R. Bageant, “Balancing a two-wheeled segway robot”
Thesis, Massachusetts Institute of Technology, 2011.
F. Grasser, A. D’arrigo, S. Colombi, and A. C. Rufer, “Joe: a
mobile, inverted pendulum” IEEE Transactions on industrial
electronics, vol. 49, no. 1, pp. 107–114, 2002.
V. Mudeng, B. Hassanah, Y. T. K. Priyanto, and O. Saputra,
“Design and simulation of two-wheeled balancing mobile ro-
bot with pid controller” International Journal of Sustainable
Transportation, vol. 3, no. 1, pp. 12–19, 2020.
H. Nabil, “Supervised neural network control of real-time two
wheel inverted pendulum” Journal of Advanced Engineering
Trends, vol. 38, no. 2, pp. 131–146, 2020.
O. E. Aburas and A. H. Ahmed, “A guide to implement a two
wheeled robot using pole-placement on arduino” The Inter-
national Journal of Engineering and Information Technology
(IJEIT), vol. 6, 2020.
M. Velazquez, D. Cruz, S. Garcia, and M. Bandala, “Velocity
and motion control of a self-balancing vehicle based on a
cascade control strategy” International Journal of Advanced
Robotic Systems, vol. 13, Apr. 2016.
H. Hellman and H. Sunnerman, “Two-wheeled self-balancing
robot,” Thesis, KTH Royal Institute of Technology, 2015.
C. Dengler and B. Lohmann, “Adjustable and adaptive control
for an unstable mobile robot using imitation learning with
trajectory optimization” Robotics, vol. 9, no. 2, p. 29, 2020.
R. P. M. Chan, K. A. Stol, and C. R. Halkyard, “Review
of modelling and control of two-wheeled robots” Annual
Reviews in Control, vol. 37, pp. 89–103, Apr. 2013.
J. Morantes, D. Espitia, O. Morales, R. Jiménez, and O. Avi-
les, “Control system for a segway” International Journal of
Applied Engineering Research (IJAER), vol. 13, 2018.
D. M Abd-elaziz, “Conventional fuzzy logic controller for ba-
lancing two-wheel inverted pendulum” Journal of Advanced
Engineering Trends, vol. 38, no. 2, pp. 107–119, 2020.
M. Moness, D. Mahmoud, and A. Hussein, “Real-time
mamdani-like fuzzy and fusion-based fuzzy controllers for
balancing two-wheeled inverted pendulum” Journal of Am-
bient Intelligence and Humanized Computing, pp. 1–17, 2020.
T. Johnson, S. Zhou, W. Cheah, W. Mansell, R. Young, and
S. Watson, “Implementation of a perceptual controller for an
inverted pendulum robot,” Journal of Intelligent & Robotic
Systems, pp. 1–10, 2020.
Pololu, “Gearmotor 4752” Accedido en 01-10-2019 a
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Josepablo Cruz Baas, Jorge Ríos Martínez, Ernesto Olguín Díaz, Francisco Moo Mena
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
The authors of the manuscripts will retain their copyright on their articles published in Pespectivas Journal. These rights allow the authors to present their manuscripts in public, prepare derivative works, reproduce them physically by printing and distribute them on their social or research networks. These rights will remain unchanged as long as the authors respect the publication and free access policy of Perspectivas Journal.
Publication Rights
Perspectivas Journal reserves all first publication rights on each of the articles that the authors have sent to its review and publication process. It implies that authors will only exercise their copyright if they state the source and origin of the publication correctly, mainly when they distribute, share, present, or use their articles' total or partial content.